J. Thrinadh, S. Datta, and M. Masanta,"Studies on chip morphology and modes of tool wear during machining of Ti-6Al-4V using uncoated carbide tool: application of multi-walled carbon nanotubes added rice bran oil as nanocutting fluid", Machining Science and Technology, an International Journal, Taylor and Francis 2020, 10.1080/10910344.2020.1815040       Article

S. Saroj, A. Sahu, and M. Masanta,"Geometrical assessment and mechanical characterization of single-line Inconel 825 layer fabricated on AISI 304 steel by TIG cladding method", Surfaces and Interfaces, vol.20, pp.100631, Elsevier 2020, 10.1016/j.surfin.2020.100631       Article

T. D, S. Kumari, and M. Masanta,"Deposition of TiC-Cu composite coating on AISI 304 stainless steel by EDC process using powder compact tool electrode", Indian Journal of Engineering and Materials Sciences, vol.27, pp.623-630, NISCAIR, June 2020       Article

P. J. Teja, S. R. Shial, D. Chaira, and M. Masanta,"Development and characterization of Ti-TiC composites by powder metallurgy route using recycled machined Ti chips", in 10th International Conference of Materials Processing and Characterization, Elsevier 2020, https://doi.org/10.1016/j.matpr.2020.02.467       Inproceedings

K. Kumar, M. Masanta, and S. K. Sahoo,"Microstructure evolution and metallurgical characteristic of bead-on-plate TIG welding of Ti-6Al-4V alloy", Journal of Materials Processing Technology, vol.265, pp.34-43, Elsevier, March 2019, 10.1016/j.jmatprotec.2018.10.002       Article

T. D and M. Masanta,"Effect of Ti/B4C ratio on the microstructure and mechanical characteristics of TIG cladded TiC-TiB2 coating on Ti-6Al-4V alloy", Journal of Materials Processing Technology, vol.266, pp.184–197, Elsevier, February 2019, 10.1016/j.jmatprotec.2018.11.005       Article

J. Thrinadh, S. Datta, and M. Masanta,"Study of surface integrity and machining performance during main/rough cut and trim/finish cut mode of WEDM on Ti–6Al–4V: effects of wire material", Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.41, pp.151, Springer, February 2019, 10.1007/s40430-019-1656-4       Article

J. Thrinadh, S. K. Sahu, S. Datta, and M. Masanta,"EDM performance of Inconel 718 superalloy: application of multi-walled carbon nanotube (MWCNT) added dielectric media", Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.41, no.305, Springer, August 2019, 10.1007/s40430-019-1813-9       Article

S. Ganguly, S. Sarkar, M. Masanta, and A. K. Mondal,"Effect of SiC nanoparticles on the wear behaviour of squeeze-cast AZ91–2.0Ca–0.3Sb alloy", Materials Science and Technology, Taylor and Francis, July 2019, 10.1080/02670836.2019.1639384       Article

T. D, A. S. Menon, and M. Masanta,"Study of Sliding Abrasive Wear Behavior of TiC-TiB2 Composite Coating Fabricated on Titanium Alloy by TIG Cladding Method", Advances in Micro and Nano Manufacturing and Surface Engineering, Proceedings of AIMTDR 2018, ch.52, pp.583-591, Springer Nature Singapore Pte Ltd. 2019, 10.1007/978-981-32-9425-7       Inbook