A. Sahu, A. R. E, M. Masanta, and C. K. Sahoo,"On the constancy in wear characteristic of large area TiC–Ni coating developed by overlapping of TIG arc scanning", Tribology International, vol.151, Elsevier, November 2020, 10.1016/j.triboint.2020.106501       Article

S. K. C, R. Pokhrel, A. K. Mondal, and M. Masanta,"Effect of temperature and applied load on sliding wear behaviour of AZ91D magnesium alloy", Materials Today: Proceedings, vol.26, no.part 2, pp.1136-1139, Elsevier 2020, 10.1016/j.matpr.2020.02.227       Article

B. R. Sekhar, R. K. Nayak, S. R. Rout, and M. Masanta,"Wear characteristic of TiC coated AISI 1020 mild steel fabricated by TIG cladding method", Materials Today: Proceedings, vol.26, no.part 2, pp.3288-3291, Elsevier 2020, 10.1016/j.matpr.2020.02.466       Article

P. J. Teja, S. R. Shial, D. Chaira, and M. Masanta,"Development and characterization of Ti-TiC composites by powder metallurgy route using recycled machined Ti chips", Materials Today: Proceedings, vol.26, no.part 2, pp.3292-3296, Elsevier 2020, 10.1016/j.matpr.2020.02.467       Article

M. K. Debta, R. Mishra, and M. Masanta,"Experimental investigation on the machining performance of AZ91D (90% Mg) alloy by wire-cut EDM", Materials Today: Proceedings, vol.33, no.8, pp.5557-5560, Elsevier 2020, 10.1016/j.matpr.2020.03.540       Article

J. Thrinadh, S. Datta, and M. Masanta,"Studies on chip morphology and modes of tool wear during machining of Ti-6Al-4V using uncoated carbide tool: application of multi-walled carbon nanotubes added rice bran oil as nanocutting fluid", Machining Science and Technology, an International Journal, Taylor and Francis 2020, 10.1080/10910344.2020.1815040       Article

S. Saroj, A. Sahu, and M. Masanta,"Geometrical assessment and mechanical characterization of single-line Inconel 825 layer fabricated on AISI 304 steel by TIG cladding method", Surfaces and Interfaces, vol.20, pp.100631, Elsevier 2020, 10.1016/j.surfin.2020.100631       Article

T. D, S. Kumari, and M. Masanta,"Deposition of TiC-Cu composite coating on AISI 304 stainless steel by EDC process using powder compact tool electrode", Indian Journal of Engineering and Materials Sciences, vol.27, pp.623-630, NISCAIR, June 2020       Article

K. Kumar, M. Masanta, and S. K. Sahoo,"Microstructure evolution and metallurgical characteristic of bead-on-plate TIG welding of Ti-6Al-4V alloy", Journal of Materials Processing Technology, vol.265, pp.34-43, Elsevier, March 2019, 10.1016/j.jmatprotec.2018.10.002       Article

T. D and M. Masanta,"Effect of Ti/B4C ratio on the microstructure and mechanical characteristics of TIG cladded TiC-TiB2 coating on Ti-6Al-4V alloy", Journal of Materials Processing Technology, vol.266, pp.184–197, Elsevier, February 2019, 10.1016/j.jmatprotec.2018.11.005       Article