A. Kumar, L. Singh, B. K. Mishra, and K. Karar,"Arsenic removal using bagasse fly ash-iron coated and sponge iron char", Journal of Environmental Chemical Engineering, vol.2, no.3, pp.1467 – 1473, Elsevier, September 2014, 10.1016/j.jece.2014.06.019       Article

A. Kumar, B. Prasad, and I.,"Adsorption of acrylonitrile from aqueous solution using bagasse fly ash", Journal of Water Process Engineering, vol.2, pp.129-133, Elsevier, June 2014, 10.1016/j.jwpe.2014.05.003       Article

L. S. Yadav, B. K. Mishra, A. Kumar, and K. Karar(Paul),"Arsenic removal using bagasse fly ash-iron coated and sponge iron char", Journal of Environmental Chemical Engineering, pp.1467 - 1473, Elsevier 2014, 10.1016/j.jece.2014.06.019       Article

G. Barman, A. Kumar, and P. Khare,"Removal of congo red by carbonized low-cost adsorbents: Process parameter optimization using a Taguchi experimental design", Journal of Chemical and Engineering Data, vol.56, no.11, pp.4102-4108, American Chemical Society, October 2011, 10.1021/je200554z       Article

A. Kumar, P. B, and S. I. M,"Isotherm and kinetics study for acrylic acid removal using powdered activated carbon", Journal of Hazardous Materials, vol.176, no.1-3, pp.774-783, Elsevier 2010, 10.1016/j.jhazmat.2009.11.102       Article

T. P, S. V. C, and A. Kumar,"Optimization of an azo dye batch adsorption parameters using Box-Behnken design", Desalination, vol.249, no.3, pp.1273-1279, Elsevier, December 2009, 10.1016/j.desal.2009.03.010       Article

A. Kumar, P. B, and S. I. M,"Optimization of acrylonitrile removal by activated carbon-granular using response surface methodology", Canadian Journal of Chemical Engineering, vol.87, no.4, pp.637-643, Wiley 2009, 10.1002/cjce.20189       Article

T. Korumilli, A. Kumar, G., and S. V. K,"Statistical optimization of process parameters for Cr (VI) biosorption onto mixed cultures of Pseudomonas aeruginosa and Bacillus subtilis", Clean - Soil, Air, Water, vol.37, no.4-5, pp.319-327, Wiley, April 2009, 10.1002/clen.200900033       Article

A. Kumar, P. B, and S. I. M,"Adsorptive removal of acrylonitrile by commercial grade activated carbon: Kinetics, equilibrium and thermodynamics", Journal of Hazardous Materials, vol.152, no.2, pp.589-600, Elservier, April 2008, 10.1016/j.jhazmat.2007.07.048       Article

A. Kumar, P. B, and S. I. M,"Optimization of process parameters for acrylonitrile removal by a low-cost adsorbent using Box-Behnken design", Journal of Hazardous Materials, vol.150, no.1, pp.174-182, Elsevier 2008, 10.1016/j.jhazmat.2007.09.043       Article