J. H. Shaik and J. Srinivas,"Optimal desing of spindle tool system for improvising the dynamic stability in end-milling process", Sadhana, vol.45, no.55, Springer, February 2020, 10.1007/s12046-020-1286-7       Article

U. K. Kar and J. Srinivas,"Material modeling and analysis of hydroxyapatite/titanium FGM plate under thermo-mechanical loading conditions", Materials Today: Proceedings, vol.33, no.8, pp.5498-5504, Elsevier 2020, 10.1016/j.matpr.2020.03.312       Article

P. L and J. Srinivas,"Flutter characteristics of axially functional graded composite wing system", Advances in aircraft and spacecraft science, vol.7, no.4, pp.353-369, Techno-Press 2020, 10.12989/aas.2020.7.4.353       Article

R. R. Mutra and J. Srinivas,"Active Vibration Control in Turbocharger Rotor System with the Use of Electromagnetic Actuator", in Advances in Applied Mechanical Engineering, pp.563-570, Springer, lecture notes in mechanical engineering, February 2020, /10.1007/978-981-15-1201-8_63       Inproceedings

R. R. Mutra, J. Srinivas, and D. Singh,"Thrust Bearing Influence on the Stability Analysis of Turbocharger Rotor-Bearing System", in Advances in Rotor Dynamics, Control, and Structural Health Monitoring. Lecture Notes in Mechanical Engineering, Lecture Notes in Mechanical Engineering, pp.85-98, Springer Nature, August 2020, 10.1007/978-981-15-5693-7_7       Inproceedings

D. Singh and J. Srinivas,"Dynamic Modeling and Analysis of Propeller Shaft Supported on Rolling Element Bearings", in Lecture Notes in Mechanical Engineering, Proceedings of the 6th National Symposium on Rotor Dynamics, pp.117-127, Springer, October 2020, 10.1007/978-981-15-5701-9_10       Inproceedings

.. U. Sudhakar and J. Srinivas,"Mechanical characteristics and corrosion behavior of friction stir AA5251-AA6063 butt welds", Materials Today Proceedings, vol.15, no.1, pp.132-137, Elsevier, June 2019, 10.1016/j.matpr.2019.05.035       Article

. L. Prabhu and J. Srinivas,"Aeroelastic instability of cantilever wing with added engine mass and thrust loads under the gust envelope", Journal of The Institution of Engineers (India): Series C, vol.100, no.3, pp.423-431, Spinger, September 2019, 10.1007/s40032-018-0486-y       Article

R. R. Mutra and J. Srinivas,"An integrated bearing parameter identification approach using a nonlinear optimisation scheme", International Journal of Automotive and Mechanical Engineering, vol.16, no.1, pp.6245-6262, The Automotive Engineering Centre (AEC), Universiti Malaysia Pahang, January 2019, 10.15282/ijame.16.1.2019.12.0474       Article

R. R. Mutra and J. Srinivas,"Rotor vibration control studies with electrorheological fluid lubricant in floating ring bearings", Noise and Vibration Worldwide, vol.50, no.5, pp.157-165, Sage, April 2019, 10.1177/0957456519843512       Article