S. Pattanayak, S. K. Sahoo, A. K. Sahoo, and R. Vinjamuri,"Non-transferring arc and wire additive manufacturing: microstructure, mechanical properties and bulk texture evolution of deposits", Journal of Rapidprototyping, February 2024, https://doi. 10.1108/RPJ-03-2023-0105       Article

S. Das, M. P. Satpathy, S. Pattanayak, and S. K. Sahoo,"An Investigation on Metallurgical Features and Joint Characteristics of Ultrasonic Spot Welded Al-Ni Sheets", Journal of Adhesion Science and Technology, April 2024, 10.1080/01694243.2024.2334135       Article

S. Pattanayak, S. K. Sahoo, A. K. Prajapati, and A. K. Sahoo,"Adaptive control of filler wire speed in wire arc additive manufacturing: impact of inter-layer dwell time on metallurgical and mechanical aspects of ER70S-6 deposits", Int. J of Advance Manufacturing Technology, June 2024, https://doi. 10.1007/s00170-024-13981-2       Article

A. K. Sahoo, S. K. Sahoo, S. Pattanayak, and M. K. Moharana,"Ultrasonic Vibration Assisted Turning of Inconel 825: A Experimental Analysis", Materials and Manufacturing Processes, vol.38, no.12, pp.1600-1614, Taylor and Francis 2023, 10.1080/10426914.2023.2165675       Article

S. Pattanayak and S. K. Sahoo,"Effect of travel speed and number of layers on surface waviness of ER70S6 deposits fabricated through non-transferred wire arc additive manufacturing", Journal of Adhesion Science and Technology, Taylor and Francis, January 2023, 10.1080/01694243.2023.2217541       Article

S. Pattanayak, S. K. Sahoo, and A. K. Sahoo,"Effect of electrode materials and process parameters on deposition characteristics during GMAW-AM", Materials and Manufacturing Processes, Taylor and Francis, March 2023, 10.1080/10426914.2023.2217895       Article

S. Pattanayak, S. K. Sahoo, A. K. Sahoo, and M. P. Satpathy,"Microstructure, strength, and fiber texture evolutions in arc-based casting using low-carbon steel wire", Journal of Manufacturing Processes, vol.101, pp.1453-1467, Elsevier, February 2023, 10.1016/j.jmapro.2023.07.032       Article

B. R. Moharana and S. K. Sahoo,"Influence of Fusion Welding Processes on Microstructure and Mechanical Properties of Dissimilar Metal (AISI 304 SS-Copper) Weldment", Materials Today: Proceedings, October 2023, 10.1016/j.matpr.2023.10.135       Article

C. Upadhyay, S. S. Rajput, S. Gangopadhyay, and S. K. Sahoo,"Performance evaluation of WC, SiAlON and SiCw + Al2O3 tools in dry machining of Inconel 617", Journal of Manufacturing Processes, vol.109, pp.235-249, Elsevier, November 2023, 10.1016/j.jmapro.2023.12.006       Article

K V. J. Bhargav, P. S. Kumar, B., R. K. Sahu, and S. K. Sahoo,"Generation of microholes on GFRP composite using ES-µ-ECDM system", CIRP Journal of Manufacturing Science and Technology, vol.38, pp.695-705, Elsevier 2022, 10.1016/j.cirpj.2022.06.015       Article