A. Kumar, S. Ram, A. K. Singh, A. K. Singh, and R. Singh,"A numerical modeling approach for rib/snook design in mechanised depillaring", in 6th Asian Mining Congress, pp.87-96, Kolkata, India, February 2016 Inproceedings
S. Ram, D. Kumar, P. Konicek, A. Singh, R. Kumar, A. Singh, and R. Singh,"Rock mechanics studies during continuous miner based coal pillar extraction in Indian coalfields.", Transactions of MGMI, vol.111, pp.89-104, Kolkata : Mining, Geological, and Metallurgical Institute of India 2015 Article
A. Kumar, S. Ram, and R. Singh,"Rock mechanics considerations for rib/snook design in mechanised depillaring", in International Conference on Engineering Geology in New Millennium (EGNM-2015), vol.special in journal of engineering geology, pp.394-409, Indian Institute of Technology, New Delhi,, October 2015 Inproceedings
R. Singh, S. Ram, A. K. Singh, R. Kumar, and A. K. Singh,"Strata control investigations during fully mechanized coal pillar extraction in Indian coalfields", in 33rd International Conference on Ground Control in Mining (ICGCM), pp.158-164, WVU, Morgantown, USA, July 2014 Inproceedings
S. Ram, A. K. Singh, D. Kumar, and R. Singh,"Roof bolt based breaker-line design during underground coal pillar extraction", in 5th International Colloquium, pp.69-71, June 2014 Inproceedings
A. K. Singh, R. Singh, P. K. Mandal, R. Kumar, A. K. Singh, and S. Ram,"Rock mechanics challenges of depillaring at deep cover", Journal of Mines, Metals and Fuels, vol.57, no.9, pp.298-306, Books & Journals Pvt Ltd. 2009 Article
R. Singh, P., A., R. Kumar, S. Ram, and S. K. Jena,"Encountering induced horizontal stress during simultaneous depillaring of thick and contiguous sections below hilly terrain: A case study", MGMI Transaction, vol.102, no.1&2, pp.37-61, Kolkata : Mining, Geological, and Metallurgical Institute of India 2005 Article
R. Singh, S. Ram, A. K. Singh, and J. Buragohain,"Underground extraction of contiguous coal seams/sections consisting thin parting: a case study", Journal of South African Institute of Mining and Metallurgy, vol.104(1), pp.17-27, SAIMM 2004 Article
P. K. Mandal, A., S. Ram, A. Singh, and R. Singh,"Depillaring of a thick coal seam using cable bolts under shallow depth cover- A case study", The Indian Mining and Engineering Journal, vol.43, no.7, pp.11-18, Bombay, India : Mining Engineers Association of India 2004 Article