K. Maity and S. Pradhan,"Investigation of tool wear and surface roughness on machining of titanium alloy with MT-CVD cutting tool", IOP Conference Series: Materials Science and Engineering, vol.346, no.1, pp.1-11, Institute of Physics Publishing 2018, 10.1088/1757-899X/346/1/012053       Article

M. Bhaumik and K. Maity,"Effect of electrode materials on different EDM aspects of Titanium Alloy", Silicon, Springer 2018, 10.1007/s12633-018-9844-x       Article

K. Maity and M. Choubey,"A review on vibration-assisted EDM, Micro-EDM and WEDM", Surface Review and Letters, World Scientific, April 2018, 10.1142/S0218625X18300083       Article

S. K. Mohapatra, K. Maity, S. K. Bhuyan, and M. P. Satpathy,"Mechanical and Tribological Characteristics of the AMC, Prepared by P/M Route along with Thermo-Mechanical Treatment", IOP Conference Series: Materials Science and Engineering, vol.338, no.1, pp.1-11, IOP Publishing 2018, 10.1088/1757-899X/338/1/012023       Article

H. Majumder and K. Maity,"Prediction and optimization of surface roughness and micro-hardness using grnn and MOORA-fuzzy-a MCDM approach for nitinol in WEDM", Measurement, vol.118, pp.1-13, Elsevier 2018, 10.1016/j.measurement.2018.01.003       Article

A. Khan and K. Maity,"3D finite element modeling for estimating key machinability aspects in turning of commercially pure titanium", Surface Review and Letters, World Scientific, January 2018, 10.1142/S0218625X18501366       Article

A. Khan and K. Maity,"Influence of cutting speed and cooling method on the machinability of commercially pure titanium (CP-Ti) grade II", Journal of Manufacturing Processes, vol.31, pp.650-661, Elsevier 2018, 10.1016/j.jmapro.2017.12.021       Article

A. Khan and K. Maity,"A comprehensive GRNN model for the prediction of cutting force, surface roughness and tool wear during turning of CP-Ti grade 2", Silicon, Springer 2018, 10.1007/s12633-017-9749-0       Article

H. Majumder and K. Maity,"Multi-response optimization of WEDM process parameters using taguchi based desirability function analysis", in IOP Conference Series: Materials Science and Engineering, vol.338, no.1, pp.1-6, IOP Publishing, iop conference : materials science and engineering, National Institute of Technology Rourkela, India, April 2018, 10.1088/1757-899X/338/1/012004       Inproceedings

K. Maity and S. Pradhan,"Investigation of FEM simulation of machining of titanium alloy using microgroove cutting insert", Silicon, Springer 2018, 10.1007/s12633-017-9707-x       Article