Ns. Das, H. Joardar, and K. Maity,"Generalised upper bound formulation of some rigid-triangle velocity fields for plane-strain extrusion and tube drawing", Surface Review and Letters, World Scientific Publishing Company, May 2023, https://doi.org/10.1142/s0218625X23500531       Article

K. Maity and R. K. Pradhan,"Optimisation of process parameter for fabrication of micro-hole in ss304 using fiber laser", in Proceeding WorlCongress on Micro and Nano Manufacturing (WCMNM), pp.1-5 2023       Inproceedings

A. Banerjee and K. Maity,"An investigation on machinability of nitronic 50 in dry environment using uncoated WC-Co tool inserts", Materials Today: Proceedings, vol.62, no.10, pp.4971-4974, Elsevier, June 2022, https://doi.org/10.1016/j.matpr.2022.04.823       Article

P. Kumar, K. Maity, A. Dasgupta, S. Gond, and B. Sarkar,"Innovations in Thermo-mechanical Processing to Develop High Strength Steel Plates", Transactions of the Indian Institute of Metals, pp.1-8, Springer India 2022, 10.1007/s12666-022-02577-7       Article

H. Majumder, A. Yadao, and K. Maity,"Effect of Input Parameters on the Key Machinability Aspects of Nitinol during Wedm", Surface Review and Letters, vol.29, no.2, pp.(2250026)1-13, World Scienti ¯c Publishing Company, February 2022, https://dx.doi.org/10.1142/S0218625X22500263       Article

M. Bhaumik and K. Maity,"Effect of powder concentration on the EDM performance of AISI 304 using cryotreated post tempered electrodes", Engineering Review, vol.42, no.1, Faculty of Engineering/Faculty of Civil Engineering, University of Rijeka, January 2022, https://doi.org/10.30765/er       Article

R. S. Roy and K. Maity,"INFLUENCE OF WEDM-TEXTURED TOOLS ON THE MACHINABILITY OF TITANIUM GRADE-23 ALLOY", Surface Review and Letters, vol.29, no.10, pp.2250128, World Scientific Publishing Company, October 2022, https:/doi.org/10.1142/22501281       Article

A. Dasgupta, B. Sarkar, P. Kumar, K. Maity, and S. K. Gond,"Innovations in Thermo-mechanical Processing to Develop High Strength Steel Plates", Transactions of the Indian Institute of Metals, vol.75, no.8, pp.2069-2076, Springer India, August 2022, https://doi.org/10.1007/s12666-022-02577-7       Article

K. Maity and H. K. Mishra,"Influence of Different Electrode Materials during micro hole fabrication in Titanium grade 5", in WCMNM2022 (World Congress of Micro and Nano Manufacturing) Belgium, September 2022, http://hdl.handle.net/2080/3785       Inproceedings

M. Bhaumik, K. Maity, and K. D. Mohapatra,"Multi-objective optimization of EDM process parameters using RSM-based GRA and TOPSIS method for Grade 6 Titanium Alloy", Surface Review and Letters, World Scientific Publishing Company 2021, 10.1142/s0218625x21500621       Article