Specification: Build Size: 550 x 550 x 550 mm
Nozzle Diameter: 0.4 mm to 1.0 mm (optional)
Printing Speed: Up to 200 mm/s
Extruder Temperature: 30-300°C (upgradable)
Bed Temperature: 30-150°C
Accuracy: Z layer height of 80-600 microns (depends on nozzle)
Connectivity: USB, SD card, Wi-Fi, U-disk
Weight: 136 kg
Material Compatibility: PLA+, ABS, PETG, HIPS, PVA, Carbon Fiber-Composite, PC, PP, TPU 90 Shore, Wood
|
Specification: PLA+ 1.75mm
Build Size: 300 x 300 x 300 mm
Nozzle Diameter: 0.4 mm (standard), with optional larger diameters
Printing Speed: Up to 120 mm/s
Extruder Temperature: Up to 280°C
Bed Temperature: Up to 120°C
Connectivity: USB, Wi-Fi, SD Card
Software Compatibility: Supports various slicing software like Cura, Repetier, and Slicer
Weight: Approximately 55 kg
|
Specification: Measurement Volume: Typically ranges from 1.2 meters to over 4 meters, depending on the model and configuration.
Accuracy: Up to 25 microns (depending on the specific Faro Arm model and scanning technology).
Scanning Speed: High-speed data capture, useful for both large and small objects.
Connectivity: Integrated with FARO CAM2 Software for easy data collection, analysis, and CAD compatibility.
Weight :Lightweight and portable, usually between 7 kg to 15 kg for easy deployment in different environments.
|
Specification: • Measurement range: Wavelength (RI) 450nm (1.5164-1.914), 589nm (1.4700- 1.8700), 680nm (1.4558-1.8557)
|
Specification: Elevated temperature and pressure reduce extraction times and solvent consumption.
Temperature range: 40°C to 200°C. The temperature is used to accelerate solvent extraction by increasing the solvents ability to dissolve analytes from the sample matrix.
Pressure: Up to 2000 psi (137 bar). The pressure is required to prevent solvent evaporation at elevated temperatures and to force solvents into the sample matrix.
Cycle Time: The extraction cycle typically lasts 5 to 20 minutes, depending on sample type and the number of solvent washes required.
|
|