National Institute of Technology Rourkela

राष्ट्रीय प्रौद्योगिकी संस्थान राउरकेला

ଜାତୀୟ ପ୍ରଯୁକ୍ତି ପ୍ରତିଷ୍ଠାନ ରାଉରକେଲା

An Institute of National Importance

Faculty Profile

ORCID ID
Scopus ID
Researcher ID
Google Scholar ID

EXPERTISE INFORMATION

Research Group
  • Manufacturing Science: [Production Engineering Division]
Areas of Interest
  • Surface Engineering and Coating Technology
  • Advance welding processes
  • Non conventional manufacturing
  • TIG cladding
  • Tribology of composite coating
  • Laser application in manufacturing

Manoj Masanta Associate Professor

Mechanical Engineering

masantam@nitrkl.ac.in

0661 - 246 2530

Biosketch

73

PUBLICATIONS

2

SPONSORED PROJECTS

8

DOCTORAL STUDENTS

2

CONTINUING EDUCATION

PERSONAL INFORMATION

Manoj Masanta

Associate Professor

Mechanical Engineering

Room Number: ME-216

Department of Mechanical Engineering, National Institute of Technology Rourkela, Sundargarh, Odisha, India - 769008

2010

Ph.D.
Mechanical Engineering
IIT Kharagpur

2006

M.E
Production Engineering
Jadavpur University

2004

B.E
Production Engineering
Jadavpur University

Teaching Experience
  • Production Engineering,  NIT Rourkela,   25 Jul 2011 - Present

FABRICATION OF TI-TIC METAL MATERIX COMPOSITE FROM WASTE TICHIPS CSIR
  • Co-Investigator
  • 36
  • Completed   Sponsored
Developemtn and Characterization of hard and wear resistance TiB2-Tic ceramic composite coating onsteel surface by electro discharge coating (EDC) Process SERB
  • Principal Investigator
  • 36
  • Completed   Sponsored

15
GOOGLE SCHOLAR H-INDEX 22
GOOGLE SCHOLAR I10-INDEX 14
SCOPUS H-INDEX
Total Publications: 73
View All Publications

D. T. Waghmare, C. K. Padhee, R. Prasad, and M. Masanta,"NiTi coating on Ti-6Al-4V alloy by TIG cladding process for improvement of wear resistance: Microstructure evolution and mechanical performances", Journal of Materials Processing Technology, vol.262, pp.551-561, Elsevier 2018, 10.1016/j.jmatprotec.2018.07.033       Article

K. Kumar, M. Masanta, and S. K. Sahoo,"Microstructure evolution and metallurgical characteristic of bead-on-plate TIG welding of Ti-6Al-4V alloy", Journal of Materials Processing Technology, vol.265, pp.34-43, Elsevier, March 2019, 10.1016/j.jmatprotec.2018.10.002       Article

T. D and M. Masanta,"Effect of Ti/B4C ratio on the microstructure and mechanical characteristics of TIG cladded TiC-TiB2 coating on Ti-6Al-4V alloy", Journal of Materials Processing Technology, vol.266, pp.184–197, Elsevier, February 2019, 10.1016/j.jmatprotec.2018.11.005       Article

R. Prasad, D. T. Waghmare, K. Kumar, and M. Masanta,"Effect of overlapping condition on large area NiTi layer deposited on Ti-6Al-4V alloy by TIG cladding technique", Surface and Coatings Technology, vol.385, Elsevier, March 2020, 10.1016/j.surfcoat.2020.125417       Article

A. Sahu, A. R. E, M. Masanta, and C. K. Sahoo,"On the constancy in wear characteristic of large area TiC–Ni coating developed by overlapping of TIG arc scanning", Tribology International, vol.151, Elsevier, November 2020, 10.1016/j.triboint.2020.106501       Article

Artificial Intelligence Techniques for Analysis and Control of Mechanical and Aerospace systems Mechanical Engineering (Workshop)
  • Co-Coordinator
  • 25 Sep 2023 - 29 Sep 2023
  • Brochure
Laser Based Manufacturing for Future Industrial Development Mechanical Engineering (Short-term Course)

  • EA1270 : Value Education and Ethics {Theory}
  • ME2202 : Primary Production Processes {Theory}
  • ME2261 : Basic Manufacturing Processes {Theory}
  • ME232 : Basic Manufacturing Technology {Theory}
  • ME250 : Thermal Engineering {Theory}
  • ME3231 : Metrology, Quality Control and Reliability {Theory}
  • ME6203 : Production Technology {Theory}
  • ME6204 : Modern Manufacturing Processes {Theory}
  • ME631 : Production Technology {Theory}
  • ME632 : Machine Tool Technology {Theory}
  • ME633 : Modern Manufacturing Processes {Theory}
  • ME640 : Laser Application in Manufacturing {Theory}
  • ME170 : Machine Drawing and Solid Modeling {Practical}
  • ME271 : Thermal Engineering Laboratory {Practical}
  • ME272 : Mechanical Engineering Laboratory {Practical}
  • ME371 : Advanced Manufacturing Practice - II {Practical}
  • ME473 : Advanced Production Engineering Laboratory {Practical}
  • ME6278 : Non-Conventional Machining Laboratory {Practical}
  • WS270 : Advanced Manufacturing Practice I {Practical}
  • WS371 : Advanced Manufacturing Practice II {Practical}

Ph.D. Students [7]
Surface Modification of Ti-6Al-4V Alloy by Depositing MMC Coating with Variant of Matrix Phases through TIG Cladding Method
Malaya Kumar Debta
Enrolled: Jul 2018
Graduated :  Dec 2023
Supervisor
Experimental Studies on Machinability Assessment of Difficult-to-Cut alloys (Inconel 718 and Ti-6Al-4V) during Traditional and Non-Traditional Machining
Jadam Thrinadh
Enrolled: Jul 2017
Graduated :  Feb 2021
Co-Supervisor
Ti-6Al-4V Alloy Weld Joint by Variant of TIG Welding Method: Characterization and Mechanical Performance Evaluation
Kamlesh Kumar
Enrolled: Jul 2014
Graduated :  Mar 2020
Supervisor
In-situ TiC-TiB2 coating on Ti-6Al-4V alloy by powder suspension electro-discharge coating (EDC) and tungsten inert gas (TIG) cladding processes
Tijo D
Enrolled: Jul 2014
Graduated :  Nov 2018
Supervisor
Development of TiC based Wear Resistance Composite Coating on AISI 304 Steel by Pulsed Laser and TIG Cladding Process
Chinmaya Kumar Sahoo
Enrolled: Jul 2013
Graduated :  Apr 2017
Supervisor
Advanced Material Processing
Dikshyanta Sahoo
Enrolled: Jul 2023
Continuing
Supervisor
Manufacturing Engineering
M D Aseef Khan
Enrolled: Jan 2020
Continuing
Supervisor
Executive Ph.D. Students [1]
Manufacturing/Surface Engg
Chaturbhuja Ganthia
Enrolled: Jul 2024
Continuing
Supervisor